New 5-string Commission on the Way!

New Five-String Fiddle Request!

A client contacted me through this website and asked whether I could build a 5-string fiddle of primarily Oregon woods. (Sure!)

Test-Drive of existing fiddles

We made an appointment and she came for a visit. She played eight of my hand-made instruments (all good fiddles), finally declaring a particular one to be exactly what she wanted, except that she did not care for the look of the one-piece Sitka Spruce top plate. It had very wide grain on the bass side and narrower on the treble side. (It sounds great, but the looks were bothering her.) Soooo…

Custom-made Five-string!

I went into my storage and retrieved a really wild-grained piece of Big Leaf Maple, and two billets of very straight, even-grained Spruce: one of Englemann, and another of Sitka: she chose the Englemann and loved the maple. She wanted an instrument essentially the same as that first one, but without the odd-looking belly grain. (The same model; made on the same mold (form), and sounding just like it, as well.) It will be tough to do, because the one she really likes is already five years old; it has had time to settle, be re-adjusted, and settle again. (Yes, it sounds good!)

Select Woods and a Good Start

So, we went out to one of my other buildings and hand-picked some likely-looking wood for the neck and ribs, and we were ready to do business. She presented a deposit, and I suggested that she take home the one she loved, for the time being, to keep her interest up while waiting for me to complete her personal treasure. She went home happy, and I began sorting willow for blocks, finding my proper templates, and enjoying the prospect of a new five-string fiddle build. I will post follow-ups as they occur.

Thanks for looking.

I will post this over on the Bluefiddles page, as well.

September 6, 2019June 2, 2020

Five String Cello Progress

Five String Cello Project in Progress

Upgrade to my brain (memory) needed, it turns out:

It turns out that the “Hybrid” cello I chose for the donor corpus, was actually solid wood on back and sides, as well as the top. So, that’s a good thing! It is still a rather cheap instrument, and so, this is still just a “mock-up” for R&D, so to speak. I will begin the “real thing,” (all handmade by me,) when the customer is satisfied that this is what he wants. (One thing he wanted is all Oregon woods, as far as possible. So this doesn’t qualify.)

Five-string neck is on the way:

The scroll is nearly complete, and I decided to go with the carved back on the scroll, as some of the early instruments had, just for fun.

Treble side five-string cello scroll — Treble side scroll

Five-String Cello Scroll in progress, front view. — Scroll front in progress.

Bass side view of five-string cello scroll. — Bass side scroll.

Five string cello scroll back carving begun. — Scroll back carving begun.

I had never tried this type of scroll back, before; Turns out it is a lot of meticulous work! I’m still not done, but I am moving along on it.

Five-string Cello scroll back progress. — Scroll back progress.

Five-string cello scroll carving process. — Pressing onward! Hands are getting tired!

There will still be a lot of scraping and polishing to do before it is done. Also, I have to make a fingerboard to fit the neck; but then I can install the neck.

Pushing forward to the finish!

Thanks for looking!

September 1, 2019December 15, 2019

Lots of Delays and New Project

Delays:

Home repairs and equipment repairs.

We had a few break-downs this summer. The lawn tractor, a faithful beast of thirty years, suddenly quit working. Turned out to be a bad PTO clutch. I was eventually able to order new parts online, and do the work myself, but it was a discouraging project, as I am really not a mechanic, by inclination. But it works again.

Meanwhile, it also turned out that one of our toilets had been leaking under the floor, and had ruined the floor, so the whole underlayment had to come out. I replaced it with something called “wonderboard”…a concrete product, reinforced with fiberglass… nasty stuff to work with, but relatively impervious, so I was glad to go ahead with it. mudded all the screws so they were flush, and all the seams, etc., then sanded the whole mess flat. Then linoleum, and sealer, and wallpaper. Finally got everything back in place, working, no leaking pipes, etc., just Wednesday of this week. Glad to be done with that.

New Project:

5-String Violoncello Piccolo

A fellow called me a while back, having seen my 5-string fiddles, and asking for a custom-made five-string cello, using all Oregon woods, if possible. (No problem…but most of the historic 5-string cellos I am aware of were piccolos…considerably smaller instruments, and quite rare. Only a few surviving models.) Nope, he wanted a full-size. Okeedoke, no problem. They even sell Cello-string sets for full-size 5-string cellos.

But he thought it over, and now is leaning toward a piccolo, just because. (They really are a special instrument!) But, now I do have a problem: I don’t have one to show him.

So, since I am short on time, I am making an experimental mock-up of the correct size, using a fractional-size hybrid cello (laminated sides and back; carved top), and replacing the normal neck with a neck and scroll specifically designed for a five-string instrument. It will not be the quality instrument he will expect in a custom-made cello, but it will give him the opportunity to experiment with the smaller size and the five strings.

I had plenty of maple on hand, but not thick enough for the neck, so I laminated two 1-1/2″ slabs, side by side, to make a thick billet, and then sawed out the blank.

I laid out the details of the scroll and neck; then used a saw to begin removing excess material. It is hot and humid, today, and I tired pretty rapidly, so I only got partway done:

Piccolo Scroll with more cuts

Piccolo Scroll with more cuts.

Starting to smooth up a bit, but still a long way to go. — Starting to smooth up a bit, but there is still a long way to go.

Plan:

I hope to have the scroll and neck complete in a day or two. I then intend to make a fingerboard and nut of Ipe, a non-threatened hardwood, and install the assembly on the hybrid corpus, immediately thereafter.

At that point, it should be down to the final finish of the neck and fingerboard, and set-up of the instrument in its new life as a five-string cello piccolo. The corpus is already in good shape, so it should not require additional attention.

I will post photos, as they become relevant.

Thanks for looking.