Tag: Bluegrass festival

Posted on

Wintergrass 2020 Exhibit

Guitars and 5-string fiddles at Wintergrass 2020

For most people, the Wintergrass Bluegrass Festival is an opportunity to hear dozens of dynamic players and bands. For a maker, like myself, it was an opportunity to present my instruments to a variety of players. for examination and “test-drives.”

My son (Brian Bishop, of Bishop Guitars) and I, had only heard of Wintergrass a month earlier, from a wood vendor and Mandolin-player, Bruce Harvie of Orcas Island Tonewoods.  We attempted to contact Wintergrass, to ask whether any exhibitors’ booths remained available, and ultimately, Bruce Adolph, one of the main organizers, contacted me to say that one exhibitor had backed out at the last minute, so, if we wanted it, that table was available. (Yes, we wanted it!)

As it turned out, we were squeezed between two other outfits, both with huge, prominent signs, so there was occasionally a little confusion, as folks assumed we were part of one or the other of our neighbors’ companies, and never even saw our lovely sign.

One little table fro two makers of guitars and five-string fiddles.
One little table fro two makers. But we got a lot of positive attention.

People frequently thought we were either with Thompson Guitars or with Peghead Nation. We had to point out the sign (It got a little crooked in the photo below.) Notice, too, that Brian and I had traded ends of the table. Why?

Because the big outfit two booths over to our right evidently persuaded the maintenance people to change the lighting, during the night, which robbed both Thompson Guitars and us of light. So Brian and I just swapped ends, so that Brian’s guitars would glow in the light, and my violins would be a little more subdued. It was an improvement for both of us, and we were fine, but Thompson was really robbed, with no such remedy. Sad. Not a good way to treat your neighbors.

Our little table. Room for two guitars , two five-string fiddles, and one violin.
Our little table. Room for two guitars and three fiddles. Brian (in the red shirt) had a third guitar, which we handed to interested players.

 

We were the only actual makers in the Dealers’ Hall where our table was located…the rest were big instrument factories, mostly: Taylor, Eastman, Yamaha, etc. Our instruments were each individually handmade by a single luthier. Brian’s parlor guitars and OM guitars were very well received, as were my 5-string bluegrass fiddles and my 4-string fiddle.

Dealers' Hall, before the show opened: our guitars and five-string fiddles were apparently the only handmade instruments in the hall.
Dealers’ Hall, before the show opened. (We were just past the second post on the left.)

 

We got a fair amount of attention, though we were small and obscure, as players came by the table. Some had come there to perform in the show, and just decided to check out the makers. Others were there to enjoy the show, but, as players, they wanted to try out the instruments. It was very enjoyable.

Joe Craven, a well-known entertainer, and a friend of the lady who commissioned this Five-string fiddle.
Joe Craven, a well-known entertainer, and a friend of the lady who commissioned this instrument. (I was hoping he would play it, but he was exhausted from his work and chose to not try it out.)

 

Very good fiddler...wish I knew his name! Playing the commissioned Five-string fiddle.
I wish I knew this young player’s name! He was very friendly and a great player.

Everyone loved our handmade instruments (both the guitars and the fiddles) and some sales may eventually result. Either way, we will be back next year!

Thanks for looking.

 

Posted on

Completed Five-String Fiddle

Commissioned Five-string fiddle complete.

Five String Fiddle is headed for the Bluegrass Festival!

The customer gave her enthusiastic blessing to my taking her precious new fiddle to the Wintergrass festival; hopefully to be played by some real professionals. Last night I completed most of the set-up, and I had it playing this morning.

So, here is most of the set-up process:

  1. Re-install the fingerboard.
  2. Carve and install the nut (final shaping later.)
  3. Ream peg-holes
  4. Carve and install the saddle.
  5. Install the end button.
  6. Install the soundpost
  7. Install the pegs.
  8. Cut the bridge to proper fit,  shape, and height.
  9. Install tailpiece and strings.
  10. Play it for final adjustment of soundpost, bridge, nut height, etc.

As you may recall, the customer chose Ipe wood for fingerboard, nut, and saddle. It is an extremely hard and dense wood, but not a threatened species, so it is still easy to obtain. In fact, the board I purchased was being sold for decking. I actually have some Apitong wood, too, salvaged from a railroad boxcar floor. Also very dense and hard, but not as pretty as Ipe.

The color of the Ipe wood looks good with the Oregon Big Leaf Maple and the Sitka spruce under their varnish. The only finish on the Ipe is a very light rub of linseed oil.

Shaping the nut of the Five-String Fiddle
Shaping the nut of Ipe wood, to match the fingerboard.

 

Ipe nut and fingerboard of the Five-String Fiddle
Nut and fingerboard installed and cut to preliminary shape.

 

Peg holes and nut grooves of the Five-String Fiddle
Peg holes reamed and nut grooves located, but not finished.

 

Pegs installed on the Five-String Fiddle
Pegs shaped, cut and installed.

 

Ipe saddle installed on the Five-String Fiddle
Saddle, of Ipe wood, installed with radiused corners to prevent cracks.

 

Bottom view of the Ipe wood saddle on the Five-String Fiddle
Bottom view of the Ipe wood saddle.

 

Completed end button with tailpiece of the Five-String Fiddle.
Completed end button with tailpiece.
Finished front view of the Commissioned Five-String Fiddle.
Finished instrument front view. End button and pegs are ebony: I can’t obtain Ipe pegs and fittings.

 

Bass side viw of the finished Five-String Fiddle
Finished bass side view.

 

Treble side view of the finished Five-String Fiddle.
Finished treble side view.

 

Finished back view of the Five-String Fiddle.
Finished back view.

 

Bass side scroll of the Five-String Fiddle.
Bass side scroll.

 

Treble side scroll of the Five-String Fiddle.
Treble side scroll.

“Playing it in.”

So, at this point, the main thing is to play the instrument as much as possible, so that it settles into its new life as a fiddle, instead of a bunch of pieces of wood! This period is called “play-in”, and there is much controversy as to what is really happening. But my observation is that there are definite positive changes that come about through vigorous playing of a new (or newly restored) instrument. I’m not going to try to “prove it:” it is just my observation and one I feel comfortable acting upon.

Five-String Fiddle Ready to play!
Ready to play!

How does she sound?

So far, so good! Very good, deep C-string tone, and well-balanced across all the strings. I would like a little more volume, and I may do some tinkering with the soundpost to that end, but I have to say, “Not bad for a brand-new fiddle!”

I think it is a winner! (Very pretty, too, but I didn’t do that…the tree did.)

Thanks for looking.